Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8445339
- Product Categories
- Friendly Links
Information Name: | Automatic ZY-I-type ore wheels oiling machine |
Published: | 2012-12-02 |
Validity: | 30 |
Specifications: | Brand new |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | Mine wheels automatic ZY-I-type the the oiling machine tramcar oiling machine / ore wheels oiling machine / oiling machine / mining the oiling machine tramcar oiling machine product: This product is used for various types of mines tramcar and other machinery oiling. The hydraulic cylinder to the suction of the lubricating oil within the oil reservoir and the operator pulled the valve handle oil gun is Bankai state, the pump generated force again acts on the hydraulic cylinder, so that the pressure generated within the lubricating oil through the oil in the oiling machine The gun fired. The tramcar the oiling machine products advantages: ⑴ the manual oiling machine oil storage oil-free shall again after opening refueling, therefore ergonomics lower, not be used for high-volume continuous operation. Products in oiling again through the oil reservoir refueling, continuous operation, high efficiency, an hour of more than 100 vehicles tramcar oiling, not only to improve the efficiency of more than 30-fold compared with manual can be realized. ⑵ the products oiling pressure (greater than 12MPa), not only oiling more uniform, while the lubricant to the bearing parts, axles, etc. dirt completely extruded, good maintenance of the equipment. Tramcar the oiling machine operation Note: Do not use dirty oil. The lubricant used must be clean, to prevent the ingress of impurities. Oil storage cover must cover tight, to prevent iron filings, gravel and other impurities from entering, so as not to damage the seal. Pulled the solenoid valve oiling, oil gun must be in Bankai state, to prevent damage to the hydraulic cylinder. Tramcar oiling machine main technical parameters: Model: ZY-I-type motor power: 5.5KW Rated voltage: 380V oiling pressure: 12MPa oiling media: various lubricating medium, oil, butter Dimensions (mm): 2250 × 380 × 700 economic Ning Huashun Machinery Co., Ltd. is mainly engaged in the following products: wellhead operating vehicle system: pusher: the chain pusher pin gear pusher, rope pusher drag car: The car stop Resettable hold rail -car stop, linkage car stop, the electric car stop, aerodynamic car stop, hydraulic car stop manual car stop cradle: CYY series of electro-hydraulic power cradle CYQ series gas shaken, CYS series of hand shaken Taiwan Contact: Manager Gao Tel: 13,371,203,115 0537-3166791 QQ: 1981811905 Website: www.huashungk.com |
Admin>>>
You are the 26076 visitor
Copyright © GuangDong ICP No. 10089450, Ji Ning Huashun Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 26076 visitor
Copyright © GuangDong ICP No. 10089450, Ji Ning Huashun Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility